-
ICU Electric Manual Bed
- Advance linear actuator system [04Pcs Motor, 01Pc Control box, 01Pc handset, 0Pc Nurse Control System (ACP)]
- Four pieces individual side-rails, with degree indicator ABS moulded
- Heavy ABS Head an Foot Panel with buffer
- 4 section top made up of ABS
- Framework made up of M.S. tubes
- Bed mounted on 5″ twin castors two with breaks durable and quiet
- S.S. Telescopic I.V. Rod with 4 location
- Holder for Urine Bag
- Sitting position ad table
- Finish: Pre-treated & Epoxy Powder Coated
- Overall approx. size: 2090L x 900W x 550-800H mm
- Positions obtained by Hand Remote and Mechanical Handle:
- Hi-Low
- Backrest elevation
- Knee rest elevation
- Optional
- C4 Section Mattress
- Nurse Control System (ACP)
-
Hospital Full Fowler Bed Mechanical
- Two Pieces individuals detachable side-rails
- 4 section top made up of oval perforated CRCA M.S. sheet
- ABS moulded Head and Foot Panel
- Framerwork made up of M.S. tubes
- Bed mounted on 4″ Castors, 2 with brakes
- Four location or I.V. Rod
- Finish: Pre-treated & Epoxy Powder Coated
- Overall approx. size: 2000L x 900W x 600H mm
- Position obtained by Smooth Crank System with Foldable handle:
- Backrest elevation
- Knee rest elevation
Optional
- 4 Section Mattress
- S.S. Telescopic I.V. Rod
- Rod pieces individual side rails, ABS moulded
- S.S. Head & Foot Panels
-
ICU Bed (Electric, ABS Top, ABS Panel and Split Railing)
- Mattress area divided into 4 sections made up of ABS sheet.
- Detachable ABS head and foot bows provide a shooting look.
- Corner PU buffers absorb impact and reduce damage in handling .
- Saline stand provision on fout locations.
- Castors of 125mm dia. Whith diagonal locking are provided for mobility with control.
- The complete metal components are pretreated and epoxy powder coated.
- Back rest, knee rest, Trendelenburg/ Reverse Trendelenburg , High-low position maneuverable by 4 separate actuators, operated by hand held remote control system.
- Frame size ( Approx) : 2030L x 900W x 550-750H.
- Back rest tilt: 0-75 degree
- Knee rest tilt: 0-35 degree
- Trendelenburg: 0-12 degree
- Reverse Trendelenburg: 0-12 degree
-
Emergency & Recovey Trolley (Hydraulic)
- Two section top height adjusted by foot operated imported hydraulic pump from 660mm to 910mm
- Gas spring assisted Trendelenburg/Reverse Trendelenburg positions
- Complete with corner buffers, synthetic rubber covered handles, sliding X-ray cassette, accessories tray, oxygen cylinder holder
- S.S. Telescopic IV rod and swing away S.S. side rails
- Finish : Pre-treated and Epoxy Powder Coated
- Four swivel castors, 5″ dia, two with total lock
- X-ray translucent removable stretcher, backrest raised on ratchet
-
Foot Step Double
- Overall approx step size : 460mm L x 510mm W x 460mm H
- Step made up from of Mat, Rubber with Aluminum
- Finish: Pre-treated and Epoxy powder coated
-
Patient’s Medicine Cupboard (STD)
- Overall size : 400L x 400W x 810H mm
- Jointless S.S. top with three sides raise edges
- One box with door made of M.S. Sheet
- Four MS legs field with PVC stumps
- Finish : Pre-treated and Epoxy Powder Coated
Optional
Also available in Complete S.S.
-
Patient Stool (Revolving)
- 4 legs base mounted on PVC stumps
- Made up of SS frame, SS top
- Height adjustable by screw
- Mechanism, from 460mm – 660mm
- Provided with foot rest ring
- Finish: Pre – treated and Epoxy Powder Coated
Optional
Also Avilable in CRCA frame work
-
Emergency Anaesthesia Trolley
- Available in 750mm & 850mm dimension
- ABS Plastic top Board with arc handle & raised-edge design
- The Whole Guard Rail Plastics – seel columns
- Centralized lock, 2 small, 2 middle & 1 big drawers
- Label card for the drawer Four luxurious noiseless castors ( two with brake )
- Defibrillator shelf, sliding side shelf, New utility container
- IV Pole, Needle disposable holder, dust basket.
- Back Side : Oxygen TAnk Holder, CPr Board, Power Extension & Hooks
- Multiple accessories available including hanging basket, dustbin, file boxes. display platform
- Dimension: ( a 750 x 530 x 930 mm b) 850 x 520 x 960mm
-
Over Bed Table M.S. With GearHandle
Adjustable height with GearHandle
- M.S. Rectangular frame work mounted on 5 cms castors
- 30″ x 16″ Laminated top adjustable by gear handle
- Epoxy Powder Coated
-
Over Bed Table Manual
- Rectangular frame work mounted on 5cms castros
- 30″ x 16″ laminated top adjustable by side knob
- Epoxy Powder Coated
- Also Available in All Stainless Steel
-
Crash Cart SS
- Overall approx. size: 100mm L x 510mm D x 1540mm H
- SS 304G tublar frame work
- SS 304 top, middle & bottom tray.
- Six removable bins.
- Two alkon make modular storage units with lock, three drawers each.
- Oxygen cylinder holder.
- SS IV rod & cardiac massage board.
- Trolley mounted on fout non-rusting 125 mm dia. Polyurethane Wheels 2 with brakes and 2 without brakes.
- Alternatives: 802-A in epoxy powder coated framerwork & trays.
-
ECG Trolley
- 515L x 595W x 1180mm
- Mild Steel tublar framerwork
- Top SS Shelf
- Appropriate Dimension: 480 x 530mm
- Other Two MS Shelf 485 x 430 mm
- Rubber Padded SS Handle
- Castor: 100mm (Two with brake & two without brake)
- Pre Treated & Power Coated Finish
-
Patient’s Medicine Cupboard (STD)
- Overall size: 450L x 450W x 760H mm
- One drawer
- One towel rail
- Fout 50mm castors
-
Bedside Locker (Deluxe)
- Overall approximately size 400mm W x 400mm D 800mm H
- CRCA sheet cabinet & drawer
- Mounted on 50mm dia. rolller wheel
- Membrane top with fout side edge, drawer front and door
- Pre-treated & epoxy powder coated
- Optional
Also available in complete S.S.